|
Replace Vertical Carrier (Profile) |
|
|
Remove the star fastener from the idle end of track, you can get it off with out breaking it, but we send extras with new carriers & restring kits. Some track use screws. | These are the steps it takes to replace a carrier, | 
| 
We use a 5/16 nut driver to tap the star gear back on. | Separate the carriers from the track, | |
Slide the carriers off the tilt rod & remove the cord. Then use a tab connector from another carrier to seperate the broken carrier. | 
| Then slide the metal strap of the new carrier into your carrier. 
|
| Put the carriers back onto the tilt rod, synchronized,Very important to have your carriers synchronized before you reassemble the whole track. | Then restring the track 
|
Then slide them back into the channel, put the star fastener back on. | 
|
| 
| You need to put the opposite end of the track against a solid surface as you tap the star gear back on
|
|
